Parts ala' Carte
INDIVIDUAL PARTS AND ACCESSORIES
  Home Page | WeaponKraft's 10/22 Bolt Buffer <BR>WeaponKraft Allen/Socket Head Takedown Screws | 10/22 LR Upgrade Packages | ULTIMATE UPGRADE PACKAGES | The MAGNUM Page | Parts Ala Carte | Dakotan's Custom 10/22s | Dealers / Links | Testimonials | ORDER / CONTACT INFO  


PLEASE e-mail me at HansonRnD@Hotmail.com   for availability before ordering during our move!

VOLQUARTSEN CUSTOM, POWER CUSTOM, RUGER FACTORY, WeaponKraft AND OTHER  PARTS INDIVUALLY AVAILABLE! 

CHECK BACK OFTEN! 

MORE NEW PRODUCTS SLOWLY BEING ADDED ALL THE TIME!


10/22 Trigger Group, and Bolt Assembly - Exploded Views

Here's an exploded diagram of the 10/22's Trigger Group showing the orientation of the Hammer (B-17A), Hammer Strut (B-18), Hammer Spring (B-44), Hammer Strut Washer (B-45), and an exploded diagram of the Bolt showing the orientation of the Extractor (B-14), Extractor  Plunger (B-16), and Extractor Spring (B-15).


Volquartsen 10/22 Exact Edge Extractor - $ 12 . 50 

The Exact Edge Extractor is manufactured through an EDM mfg process to produce exacting tolerances to +/-.0001". This extractor features a very precise "hook point." The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction and will maintain its edge through years of use.
Specs: Made of A2 tool steel, hardened to a Rc 58-60Made of A2 tool steel, hardened to a Rc 58-60


OUT OF STOCK Volquartsen 10/22 Target Hammer - $ 35 .00 

The target hammer is precision surface ground and designed to give the factory Ruger 10/22 a superb "trigger job" by simply replacing the factory hammer. Installation is drop in with no stoning or fitting required. Reduces trigger pull down to approximately 2.5 - 2.75lbs.
Specs: Made of stainless steel, hardened to Rc 58-60Made of stainless steel, hardened to Rc 58-60


Volquartsen 10/22 Auto Bolt Release (Stainless Steel) -  $10 .50

Enables the shooter to simply pull back bolt slightly to the rear and the bolt automatically releases thus eliminating the need to push up and backward on the bolt lock mechanism to release bolt. It is an easy, drop in modification.
Specs: Made of stainless steel


Power Custom Competition Hammer - $ 35 .00  

A “Drop-in” tool steel hammer with redesigned sear contact angles, and precision ground with vapor honed engagement surfaces to lighten your trigger pull from the heavy factory pull down to a light 2.75 LBS. Includes extra power hammer spring, replacement trigger return spring, and 2 hammer shims.


RUGER FACTORY STOCK ESCUTCHEON (B-51) - $ 3 .00 

I got asked for these too often! I had to start stocking them (again, for LESS than what shipping costs alone are from most sources). If you're replacing a lost one, or the new unfinished custom stock you just got didn't come with one, here they are!


RUGER FACTORY HAMMER STRUT / SPRING RETAINING WASHER (B-45) - $ 3 .00 

This is that pesky washer that tries VERY hard to reach orbit with one wrong move during Hammer Spring installation! A good part to have around as a spare, just in case.

 

RUGER FACTORY EXTRACTOR SPRING AND PLUNGER SET -  $4 .00 

The Extractor Spring (B-15) and Extractor Plunger (B16) are the two parts no one seems to have with them when they need them! Whether they flew into parts unknown when shooting or when doing an extractor installation, at $ 4 .00 shipped for a set (about what shipping alone costs from most sources) it is cheap insurance. I always have a set with me at the range!


RUGER FACTORY HAMMER STRUT & SPRING ASSEMBLY - $7 .00 

Includes Hammer Strut (B-18), Hammer Spring (B-44), and Hammer Strut Washer (B-45), all pre-assembled for a drop-in unit.

JUST MAKE SURE YOU DROP IT IN WITH THE SLOT IN THE RETAINING WASHER POINTING UP!


Bell & Carlson Extended Magazine Release -  $ 6 .00  

This is the only extended mag release that I didn't actually make myself that I like! It's easily the best low-cost extended magazine release on the market. It's formed from a high density polymer, and is one tough little drop-in unit. NO fitting required.

*These work REALLY WELL with high-capacity magazines!


Power Custom 10/22 Competition SS Recoil Spring Guide - $11.00 

A Stainless Steel Guide Rod which is stronger than the factory steel guide rod, and ensures smooth operation. Simply replaces factory guide rod. Just slide Recoil Spring, Recoil Rod Bushing, and Bolt Handle on, and assemble as usual.


 

Tubb SpeedLock CS Operating Spring - $11.00   

Tubb SpeedLock Systems CS Chrome Silicon Ruger 10/22 Operating Spring. This chrome silicon alloy spring provides lighter compression and a more positive rebound to improve the feel and function of your 10/22.  

Developed by 8-Time National High Power Champion, David Tubb, SpeedLock springs offer outstanding quality and design.

Material: Chrome Silicon Steel
Features: Spring is extra-power but is same installed height as a factory spring.


 


 



Ruger and 10/22 are registered trademarks of Sturm, Ruger & Co.
Designated trademarks and brands are the property of their respective owners.